Tilingis made convenientand simplewith ourEasy Tile Leveling Spacer. A unique tool withT-shape pin that has the ability touniform your tileseffortlessly andhassle-free!
Specially designed to fit in between tiles to equalize it- ensuring they areperfectly parallel and flat. Great tool forfloors and wall setting - justinsert the needlealong the gap of the tile and the tile spaceradjusts the spacingbetween tiles. This tile leveling spacer is reusable and durable; saves you money and trouble!
Durably made of thermoplastic PPmaterial, ensuring a smooth main bodyandsturdy surfacewhile thestainless steelneedle is corrosion-resistant to greatly reduce the probability of breaking. Don’t torment yourself by reinstalling tiles again and again!
Perfect Tile Leveling System: Specially designed in T-shape to fit in between tiles to equalize it; ensuring they are perfectly parallel and flat. Prevent tiles from moving while curing, lessens the need for polishing and grinding uneven results.
DIY Like A Pro: It is very easy to set up that you can do it anywhere you need to. The system ensures flatness between tiles avoiding movements during the mortar setting. Increase the efficiency of laying tiles and obtain a perfect, lippage-free finish!
Easy To Use: Put the leveler in between tiles. Rotate the adjustable base until tiles are perfectly even and wait for 4-5 hrs. Remove the levelers before the thin-set dries. Clean and dry storage for reuse.
Time & Money Saving: You don’t have to work long enough to just level the floor. Save time and you can do more work! Efficient and saves a lot of your money. Improve tile installation speed and reduce fatigue and stress.
Premium Quality: Made of durable and smooth thermoplastic PP material; stainless steel that is corrosion resistant to reduce the probability of breaking and replacement.
Perfect for floor, wall tiles and cement. Suitable for tiles size with 3mm to 20mm thickness and with tile gap greater than or equal to 2mm.
HOW TO USE:
Lay the first piece of brick, seam ≥2mm or above., and close to second bricks. Insert the T-pin along the crack.
Insert the T-needle along the crack, then rotate it 90 degrees.
Clamp the T-pin at the bottom of the two bricks.
Tighten the adjusting cover so that the two bricks are in the same level.
Wait about 4-5 hours after leveling.
Before the cement or tile glue has completely dried up (usually no more than 6 hours), tighten the adjusting cover in the opposite direction, then rotate the T-pin 90 degrees so that the T-pin turns to a zigzag parallel to the tile.
Remove the leveler, clean and dry storage for reuse.